Whole House Water Softeners in Flower Mound
For over 55 years, Texas Water House has been North Texas’s trusted partner for premium whole house water softener systems. Our custom-designed water softening solutions protect your home’s plumbing, extend appliance life, and deliver silky-soft water to every tap in your home. Whether you’re concerned about hard water, dry skin, or the long-term health of your plumbing system, our whole house water softeners provide comprehensive protection.
Northern Texas
service area
At Texas Water House, we are committed to delivering outstanding water solutions to a wide array of locations across Northern Texas. Our services are designed to meet the unique needs of each community, ensuring access to clean, safe, and high-quality water for both residential and commercial clients. Trust Texas Water House to be your partner in ensuring the highest standards of water quality and service excellence in the greater DFW area.

HOW HARD IS FLOWER MOUND’S WATER?
Full Flower Mound water report ↗Whole house water filtration in Flower Mound ↗Bottled water delivery in Flower Mound ↗Flower Mound.
No hardness figure on file for Flower Mound yet.
Flower Mound's water is all purchased, treated lake water from two wholesalers, Dallas Water Utilities and Upper Trinity, and the town's report prints no hardness figure.
COMMON SIGNS OF HARD WATER
What each grain per gallon looks like at home.
With no figure for Flower Mound, the signs are the measure. Three or more of these, and the free water test will put a number on it.
Cloudy glassware and white spots the dishwasher cannot rinse off: the minerals that dry out of every gallon.
The white crust is limescale. It narrows spray holes and seizes aerators and valves.
Calcium and magnesium react with soap before it foams: more soap, and scum on tubs and shower doors.
The same soap curd settles on skin and hair and does not rinse away.
Minerals bind to fabric and detergent. Towels come out stiff, whites go grey, colors fade sooner.
Scale coats heating elements and clogs small valves, so appliances work harder and fail sooner.
FLOWER MOUND’S WATER, BY HARDNESS
Dallas and Upper Trinity lake water in one town, with no hardness line in the report
Flower Mound's 2025 water quality report is laid out in three columns, Dallas, UTRWD and Flower Mound, because the town's mains carry two suppliers' water and the town samples the result. Dallas Water Utilities draws from the Elm Fork of the Trinity River and lakes Lewisville, Ray Roberts, Grapevine, Ray Hubbard, Tawakoni and Fork; Upper Trinity's Taylor plant in Lewisville takes Lewisville and Ray Roberts water, while the district brings Jim Chapman Lake water in through a pipeline it owns jointly with Irving. The federal facility record lists the town's receiving points by address rather than by supplier: a pump station at 1201 FM 407 with a 10 million gallon ground tank and five 7,000 gallon-a-minute pumps, a station at 708 Pintail Place with 3 and 2 million gallon tanks, a station at 6200 Stonecrest with a 5 million gallon tank, and elevated tanks of 2.5 million gallons on Freeman Road and 2 million on Bruton Orand.
Neither supplier's column prints hardness. The report says the secondary constituents that govern taste and scale, calcium, sodium and iron among them, are regulated by the state, are left out of the annual report and are available as monthly results on request. The columns do show that the two waters are not identical: fluoride averaged 0.627 ppm in the Dallas water, which Dallas fluoridates, and 0.26 ppm in the Upper Trinity water, which adds none; chloramine residual ran 2.97 and 2.93 ppm. For hardness the only published number belongs to Dallas, which told a council committee in December 2023 that its system runs between 120 and 155 mg/L, which the USGS scale calls moderately hard to hard and which works out near 7 to 9 grains. Upper Trinity's 2025 report lists no hardness result at all. Both are reservoir waters from the same basin, carrying the calcium and magnesium a lake gathers from its watershed, but no figure is shown for Flower Mound because the town's own report gives none, and this page does not substitute Dallas's.
Which supplier's water reaches which street is not something the report states, and with three receiving stations spread across a town this size the answer can differ between the FM 407 side and the Stonecrest side and may change through the year. In practice both waters leave the same kind of mark: spotting on glassware, scale in the kettle, a shorter life for the water heater. A softener sized for the Dallas range's upper end, 155 mg/L or about 9 grains, covers either supply without guessing which one you have. The free water test gives a Flower Mound address its own reading in ppm and grains per gallon, which is the number no report in this chain publishes.
Sources: Town of Flower Mound 2025 Water Quality Report · U.S. EPA Envirofacts SDWIS: water system facilities for TX0610023 · Upper Trinity Regional Water District: Water Treatment and Delivery · Upper Trinity Regional Water District: Water Sources · Upper Trinity Regional Water District 2025 Consumer Confidence Report · City of Dallas memorandum, December 1, 2023: Community Water Fluoridation Follow Up
HOW A SOFTENER WORKS
Ion exchange, salt and regeneration.
One tank of resin, one tank of salt, and a valve that runs the cycle.
Resin beads hold sodium ions. Calcium and magnesium swap onto the beads as water passes, and the water leaves at close to zero grains.
When the beads fill up, brine from the salt tank rinses the hardness to the drain and reloads the sodium, metered by the gallons you use.
Calcium, magnesium and a little dissolved iron. Not chlorine, chloramine, PFAS, lead or taste: that is a filter’s job, so see whole house water filtration for Flower Mound, and a reverse osmosis tap or bottled water delivery for drinking water.
A salt-free water conditioner turns hardness into crystals that stay in the water instead of on heaters and pipes: no salt, no drain, less scale, no relief for soap and skin.
HARDNESS QUESTIONS, ANSWERED
The hard water FAQ for Flower Mound.
Is Flower Mound’s water hard?
The town's 2025 report prints no hardness figure; it leaves secondary constituents such as calcium out and offers monthly results on request. Flower Mound's water is all treated lake water from Dallas and Upper Trinity, and Dallas's own system runs 120 to 155 mg/L, moderately hard to hard. A free water test puts a number on your own tap.
Is hard water safe to drink?
Yes. Hardness is calcium and magnesium, minerals with no federal drinking-water limit. It is a plumbing, appliance, soap and skin problem, not a health one.
Does a softener make my water salty?
No. The salt goes down the drain at regeneration; the water carries a little sodium in proportion to the hardness removed, which a reverse osmosis tap removes again.
THE SOURCE MATTERS
Where the number comes from.
Each figure is read from the document linked beside it, in its own units and period. A missing result stays missing; a range stays a range.
Hardness result
None on file for Flower Mound.
Utility of record: Town of Flower Mound · PWS TX0610023
Checked: EWG Tap Water Database entry ↗ (2013-2024), Flower Mound water quality report ↗. They hold 11 results for Flower Mound: Haloacetic acids (HAA5) 6 ppb; Perfluorooctanoic acid (PFOA) 0.4 ppt; Total trihalomethanes (TTHMs) 15.6 ppb; Nitrate 0.668 ppm; Lead — highest sample 3.8 ppb; Perfluorobutane sulfonate (PFBS) 4.08 ppt; Perfluorobutanoic Acid (PFBA) 8.16 ppt; Perfluoroheptanoic acid (PFHPA) 0.282 ppt; Perfluorohexanoic Acid (PFHxA) 6.76 ppt; Perfluoropentanoic Acid (PFPeA) 6.49 ppt; Chloramines 2.9 ppm. None is a hardness result.
Hardness scale
USGS Water Science School: hardness of water ↗
USGS hardness scale, mg/L as CaCO3: soft 0 to 60; moderately hard 61 to 120; hard 121 to 180; very hard over 180.
FREE WATER TEST IN FLOWER MOUND
Start with a
free water test.
We measure the hardness at your tap, size the softener in grains to that number, and install it ourselves.
